|
|||
Sampling Chamber and Pump ChamberPump chambers supplied by Waste TechSampling chambers are required for almost all sewage treatment system installations.
Waste Tech uses the same mould for both our sampling chambers and pumping chambers.
The sampling chambers have an inlet and outlet holes with pipe spigots for easy installation of inlet and outlet pipes.
The chambers are 600mm. diameter.
Why use our complete pumping chambers?If you buy a complete sampling chamber or pumping chamber, the depth of the chamber is pre-determined. This may, or may not suit your particular drainage depth. Our chambers are 2 metres deep to allow for any drain invert level. |
The NEW Crystal Septic Tank
VORTEX
Distributers Wanted
Act on CO2
Septic Tank Failure
Caravan Parks
Wastewater Tutorial
|
||